costco-RTP驗廠是什么？有什么要求？注意事項
更新日期：2017-05-09 09:14:56 已瀏覽：2359次
COSTCO驗廠之RPT合規測試項目問卷要求：
一、Product Specifications產品規格書：
1、The product specification shall identify all
rules, bans, standards to which the product must c o mply產品規格書應明確產品必須符合的所有條例，禁止條例，標準；
2、The c o mpany shall have a product
specification which is unique for their location公司應有在其使用位置的唯一的產品規格證書；
3、The c o mpany shall have a system (or
procedure) in place to ensure that product specifications are documented,
maintained, adequate, and in c o mpliance with relevant safety, legislative and
customer requirements.公司應該有一個系統（或者程序）以確保產品規格書是書面的，被維護的，充分的，同時和相關的安全性，合法性和客戶要求都相一致
二、Certification Testing 認證測試
4、The c o mpany shall conduct certification tests before issuing
a certificate of conformity to the final product, and all certificates of
conformity shall be traceable to the appropriate certification testing. 在發放成品符合性證書之前，工廠需要進行認證測試。所有的符合性證書應該可以追溯到相關聯的認證類測試。
5、Samples submitted for certification testing shall be in
sufficient number, in ac c ordance to the testing plan, and identical in all
material respects to the finished products (or finished c o mponent parts which
are listed in the product specification). 上交認證類測試的樣品應該數量充足，符合測試標準計劃，同時所有材料都應該和成品材料相符（或者符合在產品規格書所羅列的成品組件部分相符合）。
6、Changes in materials or c o mponents shall have new
certification if they could affect the safety, quality or legality of the
product. 如果材料或者組件的改變有可能影響產品的安全性，質量，或者合法性，則需要新的認證。
7、The c o mpany shall establish procedures to subcontract
analyses or testing to a CPSC approved, ac c redited lab to confirm product
safety, legality and quality. 公司應該建立程序將分析和測試轉包給經過CPSC批準，認證的實驗室，以確保產品的安全性，合法性和質量。
8、Conformance to specification/formulation shall be measured
ac c ording to a documented testing plan on sample size, frequency and method
indicated by following regulatory, or customer‘s, requirements. 應根據書面的測試計劃例如產品抽樣量 和測試頻率，以及法律及客戶要求，對產品是否符合產品規格書/規劃進行測量。
9、Frequency of third party testing shall be selected no less
than the CPSC minimum frequency. 第三方測試的頻率應該不低于CPSC最小測試頻率
……
COSTCO驗廠之RPT合規測試項目問卷要求：
一、Product Specifications產品規格書：
1、The product specification shall identify all
rules, bans, standards to which the product must c o mply產品規格書應明確產品必須符合的所有條例，禁止條例，標準；
2、The c o mpany shall have a product
specification which is unique for their location公司應有在其使用位置的唯一的產品規格證書；
3、The c o mpany shall have a system (or
procedure) in place to ensure that product specifications are documented,
maintained, adequate, and in c o mpliance with relevant safety, legislative and
customer requirements.公司應該有一個系統（或者程序）以確保產品規格書是書面的，被維護的，充分的，同時和相關的安全性，合法性和客戶要求都相一致
二、Certification Testing 認證測試
4、The c o mpany shall conduct certification tests before issuing
a certificate of conformity to the final product, and all certificates of
conformity shall be traceable to the appropriate certification testing. 在發放成品符合性證書之前，工廠需要進行認證測試。所有的符合性證書應該可以追溯到相關聯的認證類測試。
5、Samples submitted for certification testing shall be in
sufficient number, in ac c ordance to the testing plan, and identical in all
material respects to the finished products (or finished c o mponent parts which
are listed in the product specification). 上交認證類測試的樣品應該數量充足，符合測試標準計劃，同時所有材料都應該和成品材料相符（或者符合在產品規格書所羅列的成品組件部分相符合）。
6、Changes in materials or c o mponents shall have new
certification if they could affect the safety, quality or legality of the
product. 如果材料或者組件的改變有可能影響產品的安全性，質量，或者合法性，則需要新的認證。
7、The c o mpany shall establish procedures to subcontract
analyses or testing to a CPSC approved, ac c redited lab to confirm product
safety, legality and quality. 公司應該建立程序將分析和測試轉包給經過CPSC批準，認證的實驗室，以確保產品的安全性，合法性和質量。
8、Conformance to specification/formulation shall be measured
ac c ording to a documented testing plan on sample size, frequency and method
indicated by following regulatory, or customer‘s, requirements. 應根據書面的測試計劃例如產品抽樣量 和測試頻率，以及法律及客戶要求，對產品是否符合產品規格書/規劃進行測量。
9、Frequency of third party testing shall be selected no less
than the CPSC minimum frequency. 第三方測試的頻率應該不低于CPSC最小測試頻率
……
友情鏈接
